search
Loading...
Compression Springs Compression Springs

Enter your Outside Diameter and Free Length
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Outside Diameter
to
Inside Diameter
to
Free Length
to
Wire Diameter
to
Total Coils
to
Rate
to
Material Type
Max. Load
to
Max. Deflection
to
Solid Height
to
*Required Field
Extension Springs Extension Springs

Enter your Outside Diameter and Length Inside Hook
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Outside Diameter
to
Length Inside Hook
to
Wire Diameter
to
Max. Load
to
Max. Deflection
to
Initial Tension
to
Rate
to
Material Type
*Required Field
Torsion Springs Torsion Springs

Enter your Outside Diameter and Total Coils
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Outside Diameter
to
Inside Diameter
to
Total Coils
to
Free Position
to
Wire Diameter
to
Body Length
to
Max. Torque
to
Max. Deflection
to
Rate
to
Leg Length
to
Material Type
*Required Field
Conical Springs Conical Springs

Enter you Small Outside Diameter, Large Outside Diameter and Free Length
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Small Outside Diameter
to
Large Outside Diameter
to
Free Length
to
Rate
to
Total Coils
to
Solid Height
to
Wire Diameter
to
Material Type
*Required Field

Compression Spring Part Number System - In Inches

StockSpringsCatalog.com Part Number System For Compression Springs in Inches

Code Description
P Part Number
C Compression Spring
030 Wire Diameter
-250 Outer Diameter of Spring
-9500 Total Coils
-MW Material Type
-1000 Free Length
-CG End Type
-Z Finish
-IN Unit of Measure

Our Part Numbers Have Changed

 

Since we have created the new website, we have updated our dimensional part numbers to not have any decimal points. However, we have kept the three decimal spaces so remember to add the extra zeros where needed.

Previous Part Number

PC030-250-9.500-MW-1.000-CG-Z-IN

New Part Number

PC030-250-9500-MW-1000-CG-Z-IN

StockSpringsCatalog.com By Acxess Spring Part Number System In Inches For Compression Springs

We have developed an easy stock spring part number system using the actual dimensions of the spring. This part number system for springs was developed to facilitate the creation and understanding of part numbers for springs. By using the actual dimensions of the spring in the spring part number we have made our part numbers for springs simple, but yet descriptive of the actual measurements of the spring in real time. Our part numbers consist of a series of numbers to describe each individual spring. Each part number is separated by hyphens to indicate different dimensional characteristics of a spring. Each series describes a different dimension. Below you will find a breakdown explanation of how StockSpringsCatalog.com part number system works for compression springs in inches.

  • The letter P stands for Part Number
  • The letter C stands for Compression Spring
  • The first series of numbers indicates Wire Diameter=WD
  • The second series, following the first hyphen, indicates Outer Diameter=OD
  • The third series, following the second hyphen, indicates Total Coils=TC
  • The fourth series, following the third hyphen, indicates Material Type
  • The fifth series, following the fourth hyphen, indicates Free Length=FL
  • The sixth series, following the fifth hyphen, indicates End Type
  • The seventh series, following the sixth hyphen, indicates Finish
  • The eighth series, following the last hyphen, indicates Unit of Measure Inches=IN

Please look at the part number example below for a further explanation.

Compression Spring Part Number Example In Inches:

PC030-250-9500-MW-1000-CG-Z-IN

  • P=Part Number
  • C=Compression Spring
  • 030=0.030 Wire Diameter=WD
  • 250=0.250 Outer Diameter=OD
  • 9.500=Total Coils=TC
  • MW=Material Type
  • 1.000=Free Length=FL
  • CG=End Type
  • Z=Finish
  • IN=Unit Of Measure Inches

Nomenclature:

Material Types:

BC=Beryllium Copper, HD=Hard Drawn, MW=Music Wire, OT=Oil Tempered, PB=Phosphor Bronze, SPR=Spring Steel, SST=Stainless Steel

End Types:

C=Closed Ends, CG=Closed and Ground Ends, O=Open Ends

Finish Types:

BO=Black Oxide, GI=Gold Irridite, N=None, Z=Zinc

Unit of Measurement:

IN=inches, MM=millimeters

StockSpringsCatalog.com By Acxess Spring Part Number System In Metric Millimeter For Compression Springs.